Description:
ASTM A516 steel plates are carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important.
A516 grade 55, A516 grade 60, A516 grade 65, A516 grade 70 steel plate heat treatment:
1) ASTM A516 steel plates 1.50 in. [40 mm] and under in thickness are normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both.
2) ASTM A516 steel plates over 1.50 in. [40 mm] in thickness shall be normalized.
3) When notch-toughness tests are required on plates 1.5 in. [40 mm] and under in thickness, the A516 steel plates shall be normalized unless otherwise specified by the purchaser.
| ASTM A516 Steel Plate Chemical Composition: | ||||
| Elements | A516 grade 55 | A516 grade 60 | A516 grade 65 | A516 grade 70 |
| C (Thk≤12.5mm) | 0.18 | 0.21 | 0.24 | 0.27 |
| C (12.5-20mm) | 0.20 | 0.23 | 0.26 | 0.28 |
| C (50-100mm) | 0.22 | 0.25 | 0.28 | 0.30 |
| C (100-200mm) | 0.24 | 0.27 | 0.29 | 0.31 |
| C (Thk>200mm) | 0.26 | 0.27 | 0.29 | 0.31 |
| Mn (Thk≤12.5mm) | 0.55-0.98 | 0.55-0.98 | 0.79-1.30 | 0.79-1.30 |
| Mn (Thk>12.5mm) | 0.55-1.30 | 0.79-1.30 | 0.79-1.30 | 0.79-1.30 |
| P | 0.025 | 0.025 | 0.025 | 0.025 |
| S | 0.025 | 0.025 | 0.025 | 0.025 |
| Si | 0.13-0.45 | 0.13-0.45 | 0.13-0.45 | 0.13-0.45 |
| ASTM A516 Steel Plate Mechanical Properties: | |||||
| ASTM A516 | ASTM A516 | Tensile strength | Yield strength | Elongation in | Elongation in |
| Steel Grade | Steel Grade | ksi [Mpa] | ksi [Mpa] min. | 8in. [200mm] | 2in. [50mm] |
| A516 Gr 55 | A516 grade 380 | 55-75 [380-515] | 30 [205] | ≥23% | ≥27% |
| A516 Gr 60 | A516 grade 415 | 60-80 [415-550] | 32 [220] | ≥21% | ≥25% |
| A516 Gr 65 | A516 grade 450 | 65-85 [450-585] | 35 [240] | ≥19% | ≥23% |
| A516 Gr 70 | A516 grade 485 | 70-90 [485-620] | 38 [260] | ≥17% | ≥21% |
| Standard | Boiler and Pressure Vessel Steel Grades | |||
| ASTM A202/A202M | A202 Grade A | A202 Grade B | ||
| ASTM A203/A203M | A203 Grade A | A203 Grade B | A203 Grade D | A203 Grade E |
| A203 Grade F | ||||
| ASTM A204/A204M | A204 Grade A | A204 Grade B | A204 Grade C | |
| ASTM A285/A285M | A285 Grade A | A285 Grade B | A285 Grade C | |
| ASTM A299/A299M | A299 Grade A | A299 Grade B | ||
| ASTM A302/A302M | A302 Grade A | A302 Grade B | A302 Grade C | A302 Grade D |
| ASTM A387/A387M | A387 Grade 5 | A387 Grade 9 | A387 Grade 11 | A387 Grade 12 |
| A387 Grade 22 | A387 Grade 91 | |||
| ASTM A515/A515M | A515 Grade 60 | A515 Grade 65 | A515 Grade 70 | |
| ASTM A516/A516M | A516 Grade 55 | A516 Grade 60 | A516 Grade 65 | A516 Grade 70 |
| ASTM A517/A517M | A517 Grade A | A517 Grade B | A517 Grade E | A517 Grade F |
| A517 Grade H | A517 Grade P | A517 Grade Q | A517 Grade S | |
| ASTM A533/A533M | A533 Grade A | A533 Grade B | A533 Grade C | A533 Grade D |
| ASTM A537A537M | A537 Class 1 | A537 Class 2 | A537 Class 3 | |
| ASTM A612/A612M | ASTM A612M | |||
| ASTM A662/A662M | A662 Grade A | A662 Grade B | A662 Grade C | |
| ASTM A841/A841M | A841 Grade A | A841 Grade B | A841 Grade C | A841 Grade D |
| A841 Grade E | A841 Grade F | |||
| EN10028-2 | P235GH | P265GH | P295GH | P355GH |
| 16Mo3 | ||||
| EN10028-3 | P275NH | P275NL1 | P275NL2 | P355N |
| P355NH | P355NL1 | P355NL2 | P460NH | |
| P460NL1 | P460NL2 | |||
| EN10028-5 | P355M | P355ML1 | P355ML2 | P420M |
| P420ML1 | P420ML2 | P460M | P460ML1 | |
| P460ML2 | ||||
| EN10028-6 | P355Q | P355QH | P355QL1 | P355QL2 |
| P460Q | P460QH | P460QL1 | P460QL2 | |
| P500Q | P500QH | P500QL1 | P500QL2 | |
| P690Q | P690QH | P690QL1 | P690QL2 | |
| JIS G3115 | SPV235 | SPV315 | SPV355 | SPV410 |
| SPV450 | SPV490 | |||
| JIS G3103 | SB410 | SB450 | SB480 | SB450M |
| SB480M | ||||
| GB713 | Q245R | Q345R | Q370R | 18MnMoNbR |
| 15CrMoR | 14Cr1MoR | 13MnNiMoR | 12Cr2Mo1R | |
| 12Cr1MoVR | ||||
| GB3531 | 16MnDR | 15MnNiDR | 09MnNiDR | |
| DIN 17155 | HI | HII | 17Mn4 | 19Mn6 |
| 15Mo3 | 13CrMo44 | 10CrMo910 | ||
Product Display：
Manufacturing Technique
Cutting large steel plates as your requirements to make the surface of the plate bright by miling and grinding, also can make holes and make angle degrees,and can weld by your drawing.
For the thickness under 30mm, cutting by laser; For thickness over 30mm, mainly OXY-cut, flame cutting.
For the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate migh
Packaging And Transportation
