Description:
Standards: ASTM A131, ABS, BV, LR, VL (DNV GL), CCS, RINA, NK, KR, RMRS
Grades: marine grade A, Grade B, Grade D, Grade E, AH32, DH32, EH32, FH32, AH36, DH36, EH36, FH36, AH40, DH40, EH40, FH40, etc.
Shipbuilding steel products: (HAIXINDA) HXDsteel is leading shipbuilding steel supplier and exporter.
Provide shipbuilding steel plates, coils, flat bars, HP bulb flat steels, angle steel, shipbuilding steel pipes, etc. products with EN10204 3.2 MTC.
ASTM A131 Steel Plate Chemical Composition (max.) | ||||||
Grade | C | Mn | Si | P | S | Others |
Grade A | 0.21 | 2.5xC | 0.50 | 0.035 | 0.035 | |
Grade B | 0.21 | 0.60 | 0.35 | 0.035 | 0.035 | |
Grade D | 0.21 | 0.60 | 0.01-0.35 | 0.035 | 0.035 | |
Grade E | 0.18 | 0.70 | 0.01-0.35 | 0.035 | 0.035 | |
AH32/DH32/EH32 | 0.18 | 0.90-1.60 | 0.10-0.50 | 0.035 | 0.035 | Cb 0.02-0.05, V 0.05-0.10, Ti 0.02, Cu 0.35, Cr 0.20, Ni 0.40, Mo 0.08, Als min. 0.015 |
AH36/DH36/EH36 | ||||||
AH40/DH40/EH40 | ||||||
FH32/FH36/FH40 | 0.16 | 0.90-1.60 | 0.10-0.50 | 0.025 | 0.025 |
ASTM A131 Steel Plate Mechanical Properties | ||||
Grade | Yield Strength | Tensile Strength | Elongation in 8 in. | Elongation in 2 in. |
min. MPa) | MPa | min. % | min. % | |
Grade A, B, D, and E | 235 | 400-520 | 21 | 24 |
AH32 DH32 EH32 FH32 | 315 | 440-590 | 19 | 22 |
AH36 DH36 EH36 FH36 | 355 | 490-620 | 19 | 22 |
AH40 DH40 EH40 FH40 | 390 | 510-650 | 19 | 22 |
ASTM A131 Steel Plate Charpy V-Notch Impact Test Temperature | |
Grade | Temperature ⁰F [⁰C] |
Grade A | 68 [20] |
Grade B AH32 AH36 AH40 | 32 [0] |
Grade D DH32 DH36 DH40 | -4 [-20] |
Grade E EH32 EH36 EH40 | -40 [-40] |
FH32 FH36 FH40 | -76 [-60] |
Standard | Shipbuilding and Offshore Structure Steel Grades | |||
ASTM A131 | Grade A | Grade B | Grade D | Grade E |
AH32 | DH32 | EH32 | FH32 | |
AH36 | DH36 | EH36 | FH36 | |
AH40 | DH40 | EH40 | FH40 | |
EN 10225 | S355G2+N | S355G3+N | S355G5+M | S355G6+M |
S355G7+M | S355G7+N | S355G8+M | S355G8+N | |
S355G9+N | S355G9+M | S355G10+N | S355G10+M | |
S420G1+Q | S420G1+M | S420G2+Q | S420G2+M | |
S460G1+Q | S460G1+M | S460G2+Q | S460G2+M | |
API SPEC 2H | API 2H-42 | API 2H-50 |
Product Display:
Manufacturing Technique
Cutting large steel plates as your requirements to make the surface of the plate bright by miling and grinding, also can make holes and make angle degrees,and can weld by your drawing.
For the thickness under 30mm, cutting by laser; For thickness over 30mm, mainly OXY-cut, flame cutting.
For the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.
Packaging And Transportation