Description
ASTM A36 carbon steel plate is steel of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes.
ASTM A36 carbon structural steel equivalent grades are: A283C, ASME SA36, EN S235JR, JIS SS400 SM400A, DIN ST37-2, GB Q235B, FE360B, E24-2, etc
STM A36 Steel Coil Sheet Plate Chemical Composition | |||||
Thickness | ≤20mm | 20-40mm | 40-65mm | 65-100mm | >100mm |
Carbon | 0.25 | 0.25 | 0.26 | 0.27 | 0.29 |
Manganese | - | 0.80-1.20 | 0.80-1.20 | 0.85-1.20 | 0.85-1.20 |
Phosphorus | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 |
Sulfur | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
Silicon | 0.40 | 0.40 | 0.15-0.40 | 0.15-0.40 | 0.15-0.40 |
Copper min. | 0.20 | 0.20 | 0.20 | 0.20 | 0.20 |
STM A36 Steel Coil Sheet Plate Mechanical Properties | |||
Tensile Strength | Yield Strength | Elongation in | Elongation in |
ksi [Mpa] | min. ksi [Mpa] | 8in. [200mm] | 2in. [50mm] |
58-80 [400-550] | 36 [250] | ≥20% | ≥23% |
Standard | Carbon Steel, HSLA High Strength Low Alloy Steel Grades | |||
ASME SA36/ASTM A36 | A36 | |||
ASME SA283/ASTM A283 | A283 Grade C | A283 Grade D | ||
ASME SA572/ASTM A572 | A572 Grade 42 | A572 Grade 50 | A572 Grade 55 | A572 Grade 60 |
A572 Grade 65 | ||||
ASME SA573/ASTM A573 | A573 Grade 58 | A573 Grade 65 | A573 Grade 70 | |
ASME SA633/ASTM A633 | A633 Grade A | A633 Grade C | A633 Grade D | A633 Grade E |
ASME SA656/ASTM A656 | A656 Grade 50 | A656 Grade 60 | A656 Grade 70 | A656 Grade 80 |
A656 Grade 100 | ||||
EN10025-2 | S235JR | S235J0 | S235J2 | S275JR |
S275J0 | S275J2 | S355JR | S355J0 | |
S355J2 | S355K2 | S450J0 | ||
EN10025-3 | S275N | S275NL | S355N | S355NL |
S420N | S420NL | S460N | S460NL | |
EN10025-4 | S275M | S275ML | S355M | S420ML |
S355ML | S460M | S420M | S460ML | |
EN10025-6 | S460Q | S460QL | S460QL1 | S500Q |
S500QL | S500QL1 | S550Q | S550QL | |
S550QL1 | S620Q | S620QL | S620QL1 | |
S690Q | S690QL | S890Q | S690QL1 | |
S890QL | S890QL1 | S960Q | S960QL | |
JIS G3101 | SS330 | SS400 | SS490 | SS540 |
JIS G3106 | SM400A | SM400B | SM400C | SM490A |
SM490B | SM490C | SM490YA | SM490YB | |
SM520B | SM520C | SM570 | ||
JIS G4051 | S20C | S25C | S30C | S35C |
S40C | S45C | S50C | S55C | |
S60C | S65C | S70C | S75C | |
DIN 17100 | St37-2 | USt37-2 | RSt37-2 | St37-3 |
St52-3 | ||||
DIN 17102 | StE255 | WStE255 | TStE255 | EStE255 |
StE285 | WStE285 | TStE285 | EStE285 | |
StE315 | WStE315 | TStE315 | EStE315 | |
StE355 | WStE355 | TStE355 | EStE355 | |
StE380 | WStE380 | TStE380 | EStE380 | |
StE420 | WStE420 | TStE420 | EStE420 | |
StE460 | WStE460 | TStE460 | EStE460 | |
StE500 | WStE500 | TStE500 | EStE500 | |
GB/T700 | Q195 | Q235A | Q235B | Q235C |
Q235D | Q275 | |||
GB/T1591 | Q355B | Q355C | Q355D | Q390B |
Q390C | Q420B | Q420C | Q460C | |
Q390N | Q420N | Q460N | Q390M | |
Q420M | Q460M | Q550M | Q620M | |
Q690M | ||||
GB/T16270 | Q460C | Q460D | Q460E | Q460F |
Q500C | Q500D | Q500E | Q500F | |
Q550C | Q550D | Q550E | Q550F | |
Q620C | Q620D | Q620E | Q620F | |
Q690C | Q690D | Q690E | Q690F | |
Q800C | Q800D | Q800E | Q800F | |
Q890C | Q890D | Q890E | Q890F | |
Q960C | Q960D | Q960E | Q960F |
Product Display:
Manufacturing Technique
Cutting large steel plates as your requirements to make the surface of the plate bright by miling and grinding, also can make holes and make angle degrees,and can weld by your drawing.
For the thickness under 30mm, cutting by laser; For thickness over 30mm, mainly OXY-cut, flame cutting.
For the thickness 200mm steel plate, because during the flame cutting, the temperature is very high, so the cutting parts steel plate might be broken at the angle part, then our workers will repair the angles to be good condition.
Packaging And Transportation